Miele KWT6322, Operating And Installation Instructions

Page: 6 / 72

~
The more coolant there is in an
appliance, the larger the room it should
be installed in. In the event of a
leakage, if the appliance is in a small
room, there is the danger of
combustible gases building up.
For every 8 g of coolant at least 1 m
3
of
room space is required. The amount of
coolant in the appliance is stated on the
data plate inside the appliance.
~
To avoid the risk of damage to the
appliance, make sure that the
connection data (fuse rating, frequency
and voltage) on the data plate
corresponds to the household supply.
Check that this is the case before
connecting the appliance. Consult a
qualified electrician if in any doubt.
~
Be certain your appliance is
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
~
If the power cord is damaged, it
must be replaced by a Miele authorized
technician in order to protect the user
from harm.
~
Do not connect the appliance to the
electrical supply with a power bar or
extension cord. These are a fire hazard
and do not guarantee the required
safety of the appliance.
~
Do not use the appliance in areas
where there may be moisture or
splashing water (e.g. garages, laundry
rooms, etc.).
Moisture can reach the electrical
components and cause a short circuit.
~
This appliance is not to be used in
non-stationary locations, such as
ships.
~
Do not use a damaged appliance. It
could be dangerous. Check the
appliance for visible signs of damage.
~
To ensure safe operation, use the
appliance only when it is installed.
~
The appliance must be isolated from
the electricity supply during installation,
maintenance and repair work.
– the respective fuse has been
removed,
– the circuit breaker has been
tripped,or
– the power cord has been unplugged.
Pull on the plug and not on the cord
when removing it from the outlet.
~
Repairs should only be carried out
by a qualified and trained person in
strict accordance with local and
national safety regulations.
Unauthorized repairs could cause
personal injury or machine damage and
may void the warranty.
~
Repairs and other work performed
by unauthorized persons could be
dangerous and may void the warranty.
IMPORTANT SAFETY INSTRUCTIONS
6