Miele KWT6322 Operating And Installation Instructions Download Page 12

Page: 12 / 72

Included accessories

Active charcoal filter

The active charcoal filter achieves
optimum air quality by filtering the
incoming air.

Air filter

The air filter behind the ventilation grill
protects the cooling system from dust.

Chalk

Use the chalk to annotate the magnetic
strips on the wooden shelves to identify
your wines quickly and easily.

Optional accessories

Active charcoal filter

(See "Included accessories" for a
description.)

Air filter

(See "Included accessories" for a
description.)

Chalk

(See "Included accessories" for a
description.)

Stainless steel maintenance

– Each application of the Miele

stainless steel conditioner forms a
water and dirt repellent protective
coating. It gently removes water
marks, fingerprints and other dirt for
a uniformly shiny surface.

– The stainless steel cleaning cloth is

soaked with the stainless steel
conditioner.
It has the same cleaning and
protective characteristics as the
stainless steel conditioner.

Optional accessories are available
from Miele, your Miele dealer or
online via the Miele website.

Accessories

Summary of Contents for KWT6322









































































Search results

Summary of Contents for KWT6322

Reviews:

Related manuals for KWT6322

Brands by name

Popular brands

Miele KWT6322, Operating And Installation Instructions

Search results

Summary of Contents for KWT6322

Reviews:

Related manuals for KWT6322

Brands by name

Popular brands