Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Problem solving guide
55
Problem
Cause and remedy
alternating with a
number flashes in the
timer display.
The overheating protection mechanism has been ac-
tivated.
See "Overheating protection".
,
or
The fan is blocked or defective.
Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
If this fault code continues to appear in the dis-
play, contact Miele Service.
and other numbers
There is a fault in the electronic module.
Interrupt the power supply to the hob for approx. 1
minute.
If the problem persists after power has been re-
stored, please contact Miele.
Liquid has got into the
cooker hood.
Due to boiling over or spillage, liquid has made its
way through the extraction grille into the cooker hood.
The base of the grease filter can hold approx. 250 ml
of liquid. The drip tray underneath the housing can
hold a further 250 ml of liquid.
Switch the cooker hood off.
Clean the grease filter, the drip tray and the inside
of the housing (see "Cleaning and care").
Extraction performance
has decreased. Extrac-
tion noise has in-
creased.
Objects (e.g. a cloth) have been drawn into the cooker
hood.
Switch the cooker hood off.
Remove the grease filter (see "Cleaning and care").
Remove any objects from the grease filter.
The
sensor is lit up.
The charcoal filter needs to be reactivated.
If the cooker hood is being operated in
Recircula-
tion mode
, proceed as described in the operating
instructions supplied with the recirculation box.
Reset the operating hours counter (see "Cleaning
and Care" in this manual).
If the cooker hood is being operated in
Extraction
mode
, reset the operating hours counter (see
"Cleaning and Care" in this manual).