manualshive.com logo in svg

Miele KMDA 7774 FL, User Manual, Page: 83 / 93

Share
Download
Miele KMDA 7774 FL User Manual Download Page 83

Imp

ort

Ap

plia

nce

s.c

om

THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Installation

82

Flush-fit installation

Prepare the worktop cut-out Remem-
ber to maintain the minimum safety
distances (see "Safety distances").

Solid wood, tiled and glass worktops:
Fix a wooden frame 5,5 mm below
the top edge of the worktop (see dia-
gram in "Building-in dimensions -
flush-fit hobs).

Attach the seal provided underneath
the edge of the hob.

Feed the mains connection cable
down through the cut-out.

Centre the hob in the cut-out.

The gap between the ceramic surface
and the worktop must be at least
2 mm wide. This is so that the hob can
be sealed.

Connect the hob to the mains.

Check that the hob works.

Seal the gap between the hob and
the worktop with a silicone sealant
that is heat-resistant to at least
160°C.

Unsuitable sealant can damage nat-
ural stone.
For natural stone worktops and nat-
ural stone tiles, only use silicone
sealant that is specially formulated
for natural stone. Please follow the
manufacturer's instructions.

Summary of Contents for KMDA 7774 FL






























































































Reviews:

No comments