manualshive.com logo in svg

Miele KMDA 7633 FL, Operating And Installation Instructions

Share
Download
Miele KMDA 7633 FL Operating And Installation Instructions Download Page 66

Installation

*INSTALLATION*

66

Safety instructions for installation

Damage risk from incorrect installation.

Incorrect installation can cause damage to the hob.
The hob must only be installed by a qualified person.

Risk of electric shock.

Incorrect connection to the mains supply may result in an electric shock.
The hob must be connected to the electrical supply by a qualified person only.

Damage from falling objects.

Take care not to damage the hob when fitting wall units or a cooker hood above
it.
Fit the wall units and the cooker hood before the hob.

 

The veneer or laminate coatings of worktops (or adjacent kitchen

units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.

 

The hob must not be installed over a fridge, fridge-freezer, freezer,

dishwasher, washing machine, washer-dryer or tumble dryer.

 

A gas hob must not be installed next to this hob.

 

This hob must not be installed above ovens or cookers unless

these have a built-in cooling down fan.

 

After installation, ensure that nothing can come into contact with

the connection cable and that it is without hindrance.

 

The electrical cable may not come into contact with any moving

kitchen component (e.g. a drawer) or be subject to mechanical
obstruction which could damage it.

 

Observe carefully the safety clearances listed on the following

pages.

 

Exhaust ducting must be of non-inflammable material. Suitable

material is available from your Miele dealer.

Summary of Contents for KMDA 7633 FL





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands