manualshive.com logo in svg

Miele KMDA 7633 FL, Operating And Installation Instructions

Share
Download
Miele KMDA 7633 FL Operating And Installation Instructions Download Page 51

Safety features

51

Overheating protection

All the induction coils and cooling
elements for the electronics are fitted
with an overheating protection
mechanism. Before the induction coils
or cooling elements get too hot, the
overheating protection mechanism cuts
in in one of the following ways:

Induction coils

- Any Booster function in operation will

be switched off.

- The set power level will be reduced.

- The cooking zone switches off

automatically. 



 flashes in the timer

display alternating with 



.

You can use the cooking zones again as
usual when the fault code has gone out.

Cooling elements

- Any booster function in operation will

be switched off.

- The set power level will be reduced.

- The cooking zones switch off

automatically.

The affected cooking zones can only be
used again as usual once the cooling
element has cooled down to a safe
level.

The overheating protection mechanism
can be triggered by:

- Heating up an empty pan.

- Fat or oil being heated on a high

power level.

- Insufficient ventilation to the

underside of the hob.

- A hot cooking zone being switched

on after an interruption to the power
supply.

If, despite removing the cause, the
overheating protection mechanism
triggers again, contact your Miele
dealer.

Summary of Contents for KMDA 7633 FL





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands