manualshive.com logo in svg

Miele KMDA 7633 FL, Operating And Installation Instructions

Share
Download
Miele KMDA 7633 FL Operating And Installation Instructions Download Page 50

Safety features

50

Safety switch-off

Sensor controls are covered

Your hob will turn off automatically if
one or several of the sensors remain
covered for longer than 10 seconds, for
example, by finger contact, food boiling
over or by an object such as an oven
glove or tea towel. 

 flashes briefly

above the 

 sensor control and a tone

will sound.

 will go out once you have removed

the object and/or cleaned the hob and
the hob will be ready to use again.

Excessive operating time

The safety switch-off mechanism is
triggered automatically if a cooking
zone is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the cooking zone switches
off and the residual heat indicator
appears. If you switch the cooking zone
on and off again, it is ready for
operation again.

The hob is programmed to safety
setting 0 at the factory. If necessary, a
higher safety setting with a shorter
maximum operating time can be set
(see chart).

Power level*

Maximum operating time

[h:min]

Safety setting

0**

1

2

1

10:00

8:00

5:00

1.

10:00

7:00

4:00

2/2.

5:00

4:00

3:00

3/3.

5:00

3:30

2:00

4/4.

4:00

2:00

1:30

5/5.

4:00

1:30

1:00

6/6.

4:00

1:00

0:30

7/7.

4:00

0:42

0:24

8

4:00

0:30

0:20

8.

4:00

0:30

0:18

9

1:00

0:24

0:10

* The power levels with a dot after the
number are only available if the power level
range has been extended (see “Setting
range”).
** Factory default setting

Summary of Contents for KMDA 7633 FL





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands