Conversion to alternative types of gas
Check the first intake of air.
b
Securing screw
c
Air sleeve
Gap X must be 13 mm / 1/2" for both
natural and liquid gas
If this is not the case, loosen the secur-
ing screw, re-position the air jet and
then tighten the securing screw.
Re-assemble the cooktop in the
reverse order.
Important note:
When reassembling, it is important
to ensure that the profile
b
of the
control panel grips the moulding
c
on the lower casing.
When the top is reinstalled, the ignitor
and ignition safety control must be cen-
tered in their respective holes.
Put the burner heads on and secure
them with the brass rings. Replace the
burner caps.
Conversion to alternative types of gas
26