Miele KM 7678 FL, Operating And Installation Instructions

Page: 31 / 84

Operation
31
Positioning cookware
You can use a maximum of 6 pans at
the same time on this hob.
Tips
- You can position the pans anywhere
on the useable surface of the hob.
- We recommend switching the hob on
first and then placing the pans on it. If
you do this, the pans will be detected
more quickly by the hob.
- If you are using several pans at once,
position them as far apart as pos-
sible. This will enable the hob to re-
cognise each of them individually.
- Move pans on the hob one after the
other, not all at the same time.
- When you move a pan on the hob,
the associated numerical keybank
lights up. The set power level “goes
along” with it.
- Pans with a base diameter between
100 and 145 mm will not be detected
in every position on the hob.
Possible faults
You place a pan on the hob and the as-
sociated numerical keybank does not
appear.
The pan cannot be detected in this pos-
ition because it is very small.
 Re-position the pan. If it is still not
detected, use a different pan.
There are several pans on the hob. You
place another pan on the hob and the

symbol lights up.
The pans are too close together.
 Re-position the pans.
Move pans on the hob one after the
other, not all at the same time.
You re-position a pan and the set power
level starts to flash.
The pan cannot be detected.

Touch the flashing power level.
 If the power level continues to flash,
re-position the pan.
You re-position a pan, the set power
level goes out and
0 lights up.

Reset the power level.