manualshive.com logo in svg

Miele KM 7678 FL, Operating And Installation Instructions

Share
Download
Miele KM 7678 FL Operating And Installation Instructions Download Page 42

Safety features

42

System lock/safety lock

Your hob is equipped with a system
lock and a safety lock to prevent it be-
ing switched on or any settings being
altered by mistake.

The 

system lock

 is activated when the

hob is switched off. If the system lock is
activated, the hob cannot be switched
on and the timer cannot be used. A set
minute minder time continues to count
down. The hob is programmed so that
the system lock must be activated
manually. It can be programmed to be
activated automatically 5 minutes after
the hob has been switched off (see
“Programming”).

The 

safety lock

 is activated when the

hob is switched on. When the safety
lock is activated, the hob can be oper-
ated only under certain conditions:

- The hob can only be switched off.

- Selected power levels 

cannot

 be

changed.

- A set minute minder time can be

modified.

If an unavailable sensor control is
touched whilst the system lock or
safety lock is activated 



 will appear

in the timer display for a few seconds
and a tone will sound.

Activating the system lock

Touch the 

 sensor for 6 seconds.

The seconds can be seen counting
down in the timer display. When this
time has elapsed 



 will appear in the

timer display. The system lock has been
activated.

Deactivating the system lock

Touch the 

 sensor for 6 seconds.



 will appear briefly in the timer dis-

play and then the seconds will be seen
counting down. The system lock is de-
activated once the time has elapsed.

Activating the safety lock

Touch and hold the 

 and 

sensors at the same time for
6 seconds.

The seconds can be seen counting
down in the timer display. When this
time has elapsed 



 will appear in the

timer display. The safety lock is activ-
ated.

Deactivating the safety lock

Touch and hold the 

 and 

sensors at the same time for
6 seconds.



 will appear briefly in the timer dis-

play and then the seconds will be seen
counting down. Once the time has
elapsed, the lock function is deactiv-
ated.

Summary of Contents for KM 7678 FL





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands