manualshive.com logo in svg

Miele KM 6363-1, Operating And Installation Instructions

Share
Download
Miele KM 6363-1 Operating And Installation Instructions Download Page 46

Con

@

ctivity

46

Signing on

If you want to sign on your cooktop to
the Con

@

ctivity system, you will first

need to sign on the rangehood.

Disconnect the cooktop from the
mains electricity supply.

Connect the dongle to the cooktop
(see the installation instructions for
the dongle).

Reconnect the cooktop to the mains
electricity supply.

The signing on procedure must be
carried out within 10 minutes after
reconnecting the electricity supply.

Start signing on the rangehood (see
the relevant instructions).

Remove any pots or pans from the
cooktop.

There must not be any pots or pans
on the cooktop when the signing on
process is being carried out.

Switch the cooktop on 

.

Set power setting "1" for all the
cooking zones.

The 

 symbol will flash.

Wait for at least 1 minute and switch
the cooktop off 

.

Finish signing on the rangehood (see
the relevant instructions).

Summary of Contents for KM 6363-1

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands