manualshive.com logo in svg

Miele KM 6363-1, Operating And Installation Instructions

Share
Download
Miele KM 6363-1 Operating And Installation Instructions Download Page 37

Safety features

37

Safety switch-off

Safety switch-off with an overlong
cooking time

The safety switch-off mechanism is
triggered automatically if one of the
cooking zones is heated for an
unusually long period of time. This
period of time depends on the power
setting selected. Once exceeded, the
cooking zone switches off and the
residual heat indicators appear. The
cooking zone can be operated again
after it has been switched off and back
on.

Safety switch-off if the sensors are
covered

Your cooktop will switch off
automatically if one or several sensors
remain covered for more than about
10 seconds, for example, by finger
contact, food boiling over or an object.
The 

 symbol will appear in the relevant

cooking zone display and a tone will
sound.
The 

 symbol will go out once you have

removed the object or cleaned the
cooktop and the cooktop will be ready
to use again.

Summary of Contents for KM 6363-1

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands