manualshive.com logo in svg

Miele KM 6363-1, Operating And Installation Instructions

Share
Download
Miele KM 6363-1 Operating And Installation Instructions Download Page 27

Operation

27

Fire hazard!

Do not leave the cooktop unattended
whilst it is being used.
Please note that the heating up time
on induction cooktops is very much
shorter than on conventional
cooktops.

Switching on

Touch the 

 sensor.

 appears in each of the cooking zone

indicators. If no further entry is made,
the cooktop will turn itself off after a few
seconds for safety reasons.

Selecting/Changing the power
setting

Touch the appropriate number sensor
for the power setting you want.

The selected power setting will appear
in the cooking zone display.

Switching off

To switch off a cooking zone, touch
the 0 sensor for that cooking zone.

To switch off the cooktop and all the
cooking zones, touch the 

 sensor.

Residual heat indicator

If a cooking zone is still hot, the residual
heat indicator will light up after it has
been switched off.

The lines of the residual heat indicator
go out one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.

Danger of burning! Do not touch

the cooking zones whilst the residual
heat indicators are lit up.

Summary of Contents for KM 6363-1

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands