Problem
Possible fault
Solution
Power level 9 is
automatically reduced
if you select power
level 9 on the
connected cooking
zone.
Operating both zones
at power level 9 would
exceed the permitted
maximum power for the
cooktop.
The cooktop switches
off while in use, and a
flashing
F
appears in
the timer display.
One or several of the
sensor are covered,
e.g. by fingers, food
boiling over or by an
object.
Clean the control panel or
remove the object (see
"Safety switch-off".)
Auto heat-up is turned
on, but the food does
not start cooking.
Large amounts of food
are being heated.
Start cooking at the highest
power level, then reduce the
power level manually.
The cookware
conducts heat poorly.
The cooling fan
continues to run after
the appliance has been
switched off.
The fan runs until the
appliance has cooled
down and then
switches off
automatically.
Troubleshooting
52
