You can change the default settings of the programme
options (see chart). Several settings can be altered in
succession.
After calling up the programming,
P
(programme) and
S
(status) appear in the timer display; in all cooktops with three
cooking zones another selection scale will light up in the rear
left.
The programme is displayed in the front left and rear left
cooking zones. Example:
Programme 03 = front left
0
, rear left
3
Programme 14 = front left
1
, rear left
4
The status is displayed in the front right cooking zone display.
Calling up programming
^
While the cooktop is switched off, touch the sensors
s
and
$
at the same time
until the indicator light for the safety
lock flashes.
To set the programme
^
To set the
units digit
, touch the sensor for the
rear left
cooking zone and then the appropriate number on the
control panel.
^
To set the
tens digit
, touch the sensor for the
front left
cooking zone and then the appropriate number on the
control panel.
To set the status
^
Touch the sensor of the
front right
cooking zone and then
the appropriate number on the control panel.
How to save the settings
^
Touch the
s
sensor until the displays go out.
How to avoid saving the settings
^
Touch the
$
sensor until the sensors go out.
Programming
46
Summary of Contents for KM 6208
Page 2: ...2 ...
