manualshive.com logo in svg

Miele KM 6208, Operating And Installation Instructions

Share
Download
Miele KM 6208 Operating And Installation Instructions Download Page 17

~

Lift pans into position on the cooktop. Sliding them into place will

cause scuffs and scratches.

~

Grains of salt, sugar and sand (e.g. from cleaning vegetables)

can cause scratches if they get under pan bases. Make sure that
the ceramic surface is clean before placing pans on it.

~

Even a light object could cause damage in certain

circumstances. Do not drop anything on the ceramic surface.

~

Do not place hot objects on the control field as this could cause

damage to the electronics underneath. Do not place hot pans on the
touch display.

~

Do not use the appliance to heat up the room. Due to the high

temperatures radiated, objects near the appliance could catch fire.
The life of the appliance could also be reduced.

~

The following factors can cause the area around the control panel

and the frame or edges of the cooktop to become hot: The length of
time the cooktop has been used for, using it on high settings, using
large pans, and the number of zones in use at any one time.

~

Pots and pans made of aluminium or with an aluminium base can

leave a metallic sheen on the cooktop. This can be removed with the
Original Miele ceramic and stainless steel cooktop cleaner (see
"Cleaning and care").

~

To prevent the risk of spillages etc. burning on, remove any

soiling as quickly as possible and ensure that pan bases are clean,
dry and free of grease.

Cleaning and care

~

Do not use a steam cleaning appliance to clean this appliance.

The steam could reach electrical components and cause a short
circuit.

Warning and Safety instructions

17

Summary of Contents for KM 6208









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands