Miele KM 2356 Operating And Installation Instructions Download | Manualshive

Page: 9 / 64

background image

Warning and Safety instructions

9

Technical safety



Unauthorised installation, maintenance and repairs can cause

considerable danger for the user. Installation, maintenance and re-
pairs must only be carried out by a Miele authorised technician.



Do not use a damaged appliance. It could be dangerous. Check

the hob for visible signs of damage.



Reliable and safe operation of this hob can only be assured if it

has been connected to the mains electricity supply.



The electrical safety of this hob can only be guaranteed when cor-

rectly earthed. It is essential that this standard safety requirement is
met. If in any doubt please have the electrical installation tested by a
qualified electrician.



To avoid the risk of damage to the hob, make sure that the con-

nection data on the data plate (voltage and frequency) match the
mains electricity supply before connecting it to the mains.
Consult a qualified electrician if in doubt.



Do not connect the hob to the mains electrical supply by a multi-

socket adapter or extension lead. These are a fire hazard and do not
guarantee the required safety of the appliance.



For safety reasons, this hob may only be used after it has been

built in.



This hob must not be used in a non-stationary location (e.g. on a

ship).



Never open the casing of the hob.

Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.



While the hob is under guarantee, repairs should only be under-

taken by a Miele authorised service technician. Otherwise the guar-
antee is invalidated.

«
...
7
8
9
10
11
...
»

Summary of Contents for KM 2356

































































Reviews:

No comments

Related manuals for KM 2356

Brand: Panasonic Pages: 86

Brand: B&Q Pages: 2

Brand: Pelgrim Pages: 54

Brand: Indesit Pages: 12

Brand: BORETTI Pages: 96

Brand: Candy Pages: 29

Brand: Beko Pages: 19

Brand: Beko Pages: 20

Brand: Beko Pages: 24

Brand: Beko Pages: 28

Brand: Beko Pages: 23

Brand: Beko Pages: 44

Brand: Beko Pages: 20

Brand: Beko Pages: 24

Brand: Beko Pages: 27

Brand: Beko Pages: 24

Brand: Beko Pages: 20

Brand: Beko Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands