Miele KFNS 37232 iD Operating And Installation Instructions Download Page 64

Page: 64 / 76

Securing the appliance in the
niche

Press the appliance against the side
of the housing unit on the hinge side.

Secure the appliance in the housing
unit by screwing chip board screws

through the tabs on the hinges at

the top, bottom and middle of the
appliance.

Push the loose bracket up against
the furniture wall.

Attach fixing bracket

to the

housing unit side wall with screw

Drill holes in the housing unit side
walls if necessary.

Attach fixing bracket

to the

housing unit side wall with screws

Drill holes in the housing unit side
walls if necessary.

Important

Push the protruding

bracket using your thumb towards
the housing unit wall whilst tightening
the screws. The appliance must not
pull back into the unit.

Retighten screws

and

Building in the appliance

Summary of Contents for KFNS 37232 iD













































































Search results

Summary of Contents for KFNS 37232 iD

Reviews:

Related manuals for KFNS 37232 iD

Brands by name

Popular brands

Miele KFNS 37232 iD, Operating And Installation Instructions

Search results

Summary of Contents for KFNS 37232 iD

Reviews:

Related manuals for KFNS 37232 iD

Brands by name

Popular brands