Carry out the following steps on both
doors.
^
A gap of 8 mm is set ex-works
between the appliance door and the
fixing bracket. Double check this gap
and reset it if necessary.
^
Push fitting aids
b
up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see
-
on
the diagram).
Tip:
Push the fitting aids
b
together
with the furniture front up to the height
adjoining unit furniture doors.
^
Undo nuts
c
and take fixing bracket
d
off together with fitting aids
b
.
Building in the appliance
67
