![background image](http://html.mh-extra.com/html/miele/kfn-8996-sde-ed-1/kfn-8996-sde-ed-1_operating-and-installation-manual_236575054.webp)
Exchange cover
h
in the middle of the
appliance with hinge bracket
i
. To do
this:
^
Unscrew cover
h
and hinge bracket
i
.
^
Pull bearing bush
k
upwards out of
the hinge bracket and then pull hinge
pin
j
downwards and off.
^
Turn the cover and bracket around
and screw them securely into the
opposite side.
^
Replace bearing bush
k
into hinge
bracket
i
from above and then push
hinge pin
j
, long side first, from
below into the hinge bracket.
Important:
When fitting the bearing
bush and the hinge pin make sure
that they both fit correctly in the hinge
bracket.
Refitting parts in the upper appliance
door:
^
Pull the bearing bush approx. 2 cm
out of the door (1).
^
Using a screwdriver, carefully remove
the covers from both sides.
^
Loosen both screws in the insert (see
arrows).
Changing the door hinging
54