manualshive.com logo in svg

Miele KFN 8996 SDE ED-1, Operating And Installation Manual

Share
Download
Miele KFN 8996 SDE ED-1 Operating And Installation Manual Download Page 23

Temperature display brightness

The appliance is supplied with the
brightness of the temperature display
behind the door set as low as possible.
However, if the door is opened, a
setting changed or if the alarm is
sounding, the temperature display
behind the door will appear much
brighter for approx. 1 minute.

The brightness level of this display can
be adjusted:

^

Press and hold the Super freeze
button for approx. 5 seconds.

The Super freeze indicator light flashes
and a

;

flashes in the temperature

display.

^

Press one of the temperature selector
buttons repeatedly until

^

appears in

the display.

^

Press the Super freeze button again.

^

lights up in the display.

^

You can now adjust the level of
brightness by pressing the
temperature selector buttons. You
can choose from settings

1

to

5

:

1

: lowest setting,

5

: brightest setting.

^

Press the Super freeze button to save
the setting.

^

Press the freezer section On/Off
button to come out of the setting
mode.
Otherwise the electronics will revert
to normal operation after 2 minutes.

The correct temperature

23

Summary of Contents for KFN 8996 SDE ED-1





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands