![background image](http://html.mh-extra.com/html/miele/kfn-8996-sde-ed-1/kfn-8996-sde-ed-1_operating-and-installation-manual_236575053.webp)
^
Close the refrigerator section door.
^
Remove the two screws from the top
of the bearing block.
^
Swing the door out to the side and
then lift it up and off.
Refitting the parts:
^
Unscrew bearing block
e
.
^
Remove cover
f
.
^
Refit cover
f
on the opposite side by
turning it 180° and then pushing it in
from the side and then turn the
earthing contact
g
around and fit it
on the opposite side too.
^
Fit the spacer bushes at the back of
the bearing block on the opposite
side.
^
Screw the bearing block onto the
opposite side.
^
Pull the grey cover on the bearing
block forwards (1) and push it into
the other side of the bearing block
(2).
Changing the door hinging
53