![background image](http://html.mh-extra.com/html/miele/kfn-8995-sd-ed-1/kfn-8995-sd-ed-1_operating-and-installation-instructions_236574051.webp)
^
Remove the two screws from the top
of the bearing block.
^
Swing the door out to the side, then
lift it up and off.
Refitting the parts:
^
Unscrew bearing block
e
.
^
Remove cover
f
.
^
Refit cover
f
on the opposite side by
turning it 180° and then pushing it in
from the side. Netx, turn the earthing
contact
g
around and fit it on the
opposite side, too.
^
Fit the spacer bushings at the back
of the bearing block on the opposite
side.
^
Screw the bearing block onto the
opposite side.
^
Pull the grey cover on the bearing
block forwards (1) and push it into
the other side of the bearing block
(2).
Changing the door hinging
51