![background image](http://html.mh-extra.com/html/miele/kfn-8995-sd-ed-1/kfn-8995-sd-ed-1_operating-and-installation-instructions_236574052.webp)
Exchange cover
h
in the middle of the
appliance with hinge bracket
i
. To do
this:
^
Unscrew cover
h
and hinge bracket
i
.
^
Pull bearing bushing
k
upwards out
of the hinge bracket and then pull
hinge pin
j
downwards and off.
^
Turn the cover and bracket around
and screw them securely into the
opposite side.
^
Replace bearing bushing
k
into
hinge bracket
i
from above and
then push hinge pin
j
, long side
first, from below into the hinge
bracket.
Important:
When fitting the bearing
bushing and the hinge pin, make
sure that they both fit correctly in the
hinge bracket.
Refitting parts in the upper appliance
door:
^
Pull the bearing bushing approx. 2
cm out of the door (1).
^
Using a screwdriver, carefully
remove the covers from both sides
(2).
^
Loosen both screws in the insert (see
arrows).
Changing the door hinging
52