Problem solving guide
77
Problem
Cause and remedy
The LED lighting is not
working on any of the
shelves.
Liquid has spilt onto the LED lighting on one of the
shelves or the metal discs (contacts) in the left-hand
shelf supports.
The safety switch off mechanism has switched off the
LED lighting on all the shelves.
Wipe the stainless steel trim with LED lighting with
a damp cloth and dry it or leave it outside the ap-
pliance to dry. Clean the metal discs (contacts) in
the shelf supports by wiping and drying them.
Make sure that the contacts are clean and dry be-
fore inserting the shelves with lighting in the appli-
ance.
Push the shelf in until it clicks into position.
Close the appliance door.
When the door is opened again, the interior lighting
will come on.
If this is not the case, then there is a fault.
Call the Service Department.
