Temperature and door alarm
35
Switching the temperature alarm off
early and checking the warmest tem-
perature
If the alarm disturbs you, you can
switch it off early. You can also find out
what the warmest temperature was in
the freezer section.
Touch
.
The fault message is confirmed and the
alarm will stop. The start screen ap-
pears in the display: the warmest tem-
perature recorded in the freezer section
so far will flash in the temperature dis-
play for approx. 1 minute. The temper-
ature display will then change to show
the current temperature in the freezer
section.
You can exit from the flashing temperat-
ure display early:
Touch the temperature display for the
freezer section.
The flashing warmest temperature dis-
play will go out. The display will then re-
vert to showing the current temperature
in the freezer section.
Door alarm
The appliance has a warning system to
prevent energy being wasted and food
becoming warm if the doors are left
open.
If an appliance door is left open for a
longer period of time,
will light up
yellow on the relevant temperature dis-
play. An alarm tone will also sound.
The amount of time until the door alarm
is triggered depends on the setting se-
lected (factory default setting =
1 minute) and can be changed (see
“Selecting further settings – Changing
the time until the door alarm is
triggered”). However, the door alarm
can also be turned off (see “Selecting
further settings – Setting the volume/
Switching alarms and audible tones on/
off”).
The alarm will stop and
will go out
on the display as soon as the door is
closed.
Summary of Contents for KFN 29493 DE edt/cs
Page 114: ......
Page 116: ...M Nr 11 000 000 02 en GB KFN 29493 DE edt cs ...
