Miele KFN 29493 DE edt/cs Page 33 Operating And Installation Instructions Download

Page: 33 / 116

Using Super cool and Super freeze

Switching a function on or off



Touch the temperature display for the
section you want.

°C







Refrigerator section display – SuperCool

-18

°C









Freezer section display – SuperFreeze

The current temperature and



appear

in the display.



Touch



- If the symbol is lit up orange, the

function is selected.

- If the symbol is white, the function is

deselected.



Touch

to confirm your entry.



Or wait approximately 8 seconds
after the last touch of a button. The
setting will then be automatically ad-
opted.

The SuperCool or SuperFreeze function
is switched on or off.

Functions that are switched on are

not

displayed on the start screen.

After an interruption to the power sup-
ply any function that was previously
switched on will be switched off.

Displaying a selected function



Touch the temperature display for the
relevant section.

The current temperature appears on the
display. The symbol for the selected
function lights up orange.

Summary of Contents for KFN 29493 DE edt/cs





















































































































Search results

Summary of Contents for KFN 29493 DE edt/cs

Reviews:

Related manuals for KFN 29493 DE edt/cs

Brands by name

Popular brands

Miele KFN 29493 DE edt/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 29493 DE edt/cs

Reviews:

Related manuals for KFN 29493 DE edt/cs

Brands by name

Popular brands