manualshive.com logo in svg

Miele KFN 29493 DE edt/cs, Operating And Installation Instructions, Page: 27 / 116

Share
Download
Miele KFN 29493 DE edt/cs Operating And Installation Instructions Download Page 27

Switching on and off

27

Switching off the refrigerator section
separately

The refrigerator section can be
switched off without having to switch
off the freezer section.

As the refrigerator section is not being
cooled, the water in the water con-
tainer will go stale. Switch off the ice
cube maker and drain the water con-
tainer.

Tip: 

We recommend using the Holiday

mode function if you are away on holi-
day (see “Selecting further settings” –
“Switching Holiday mode 

 on/off”),

so that the appliance operates at lower
power rather than being switched off
completely.

If the Party mode 

 or Super cool 

functions have been previously selec-
ted, these will be switched off auto-
matically.

°C

5

-18

°C

Standby

Touch the temperature display in the
field for the refrigerator section.

5

°C

OK

Refrigerator section display

Touch 

 or 

 until 

 is displayed.

Touch 

.

Touch 

OK

 to confirm your entry.

°C

-18

Start screen – refrigerator section switched
off

The temperature display for the refriger-
ator section goes out and 

 lights up.

The refrigerator section is switched off.
The temperature in the freezer section
will still be shown in the display. The re-
frigerator section interior lighting will go
out.

Summary of Contents for KFN 29493 DE edt/cs





















































































































Reviews:

No comments