Changing the door hinging
64
Undo the screws
and remove
lower hinge plate
together with
hinge pin
, plastic disc
and the
adjustable foot
.
Unscrew the hinge pin
together
with plastic disc
, and screw back
into the opposite hole in the the hinge
plate.
Carefully remove cover
and refit on
the opposite side.
Screw the lower hinge plate
together with hinge pin
, plastic
disc
and the adjustable foot
in
on the opposite side.
Lower the lower door onto the hinge
pin
.
Close the appliance door.
Fit hinge plate
turned through 180°
into the bearing bush in the lower
door. Important! Make sure the
plastic disc
is fitted back on the
hinge pin.
Then screw the hinge plate
on
securely with screws
.
Place the upper door onto the hinge
pin from above.
Fit hinge plate
turned through 180°
into the bearing bush in the upper
door.
Then screw the hinge plate on
securely with screws
.
Fit cover
back onto the opposite
site. It will click into position.
Fit cover
back onto the opposite
site. It will click into position.
Unscrew adjustable foot
from the
lower hinge plate until it sits on the
floor.
