Using Super freeze and Dynamic cooling
26
DynaCool function
When the DynaCool function is not
switched on, the natural circulation of
air in the appliance will cause different
temperature zones in the refrigerator as
the cold, heavy air will sink to the
lowest section of the appliance. You
should bear this in mind when placing
food in the appliance (see “Storing food
in the refrigerator section”).
However, if you are placing a large
amount of food in the refrigerator at any
one time, e.g. for a party, it is a good
idea to switch on Dynamic cooling. This
way you can distribute the temperature
inside the appliance to all areas more
evenly so that all the food will be chilled
to about the same degree.
The temperature is set as normal with
the temperature control.
DynaCool should also be selected
when:
– the ambient temperature in the room
is high (above approx. 30 °C), and
– when humidity levels are high (e.g. in
the summer).
The DynaCool functiuon can be
switched on if the temperature in the
refrigerator section is visible in the
temperature display.
Switching on DynaCool
Briefly press the DynaCool button
.
The DynaCool
symbol lights up. The
fan will switch on automatically.
Switching off DynaCool
Because DynaCool requires more
energy, you should switch it off under
normal conditions.
Press the DynaCool button
until
the DynaCool symbol
goes out.
To save energy, the fan switches off
automatically whilst the door is open.
