background image

Warning and Safety instructions

9

 

The appliance must be isolated from the electricity supply during

installation, maintenance and repair work.

 

Unauthorised installation, maintenance and repairs can cause

considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.

 

While the appliance is under warranty, repairs should only be un-

dertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.

 

Miele can only guarantee the safety of the appliance when genu-

ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.

Correct use

 

The appliance is designed for use within a certain climate range

(ambient temperatures), and should not be used outside this range.
The climate range for your appliance is stated on the data plate in-
side the appliance. Installing it in a room with too low an ambient
temperature, e.g. a garage, will lead to the appliance switching off
for longer periods so that it cannot maintain the required temperat-
ure.

 

Do not cover or block the air vents as this could impair the effi-

ciency of the appliance, increase the electricity consumption and
could cause damage to the components.

 

If storing food which contains a lot of fat or oil in the appliance or

the door, make sure that it does not come into contact with plastic
components as this could cause stress cracks or break the plastic.

 

Do not store explosive materials in the appliance or any products

containing propellants (e.g. spray cans). Electrical components could
cause flammable vapours to ignite. Danger of fire and explosion.

 

Do not operate any electrical equipment (e.g. an electric ice cream

maker) inside the appliance. Danger of sparking and explosion.

Summary of Contents for KFN 16947 D ed/cs

























































































Reviews: