Installation
-
I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-
81
Refitting the lower appliance door
Pull the hinge pin
complete with
washer
and adjustable foot
up-
ward to remove.
Remove the stopper
.
Undo the screws
and remove the
hinge plate
.
Unscrew the hinge part
from the
hinge plate
, turn it 180°, and screw
it into the opposite hole in the hinge
plate.
Insert the stopper
into the other
hole.
Remove the cover
.
Take the screw
out and screw it
into the outside hole on the opposite
side.
Turn the cover
by 180° and refit it
in the holes on the opposite side.
Screw the hinge plate
into place
on the opposite side using the two
outer slots only. Do not use the screw
in the middle because otherwise you
will not be able to align the appliance
door with the outer slots later on.
Important. Screw the adjustable
foot
into the hinge pin
as far as
it will go.
Reinsert the hinge pin
complete
with washer
and adjustable
foot
.
Important. The lug on the hinge pin
must point to the back again.
Place the lower door on the hinge
pin
from above.
Close the lower appliance door.
In the middle of the appliance, insert
the hinge pin
through the hinge
plate
and into the lower appliance
door.
