Miele KFN 14943 SDE Operating And Installation Instructions Download

Page: 64 / 72

Hang the panel

on the shock

absorber arm

Pull the shock absorber arm

towards the hinge bracket and insert
the pin

from the top so that the

square rests in the recess.

Put on the cover

in such a way

that it engages.

Take care that the cover

is seated

correctly to ensure that the door closes
properly and the pin is secured.

Remove the securing device

Place the panel

onto the soft-close

mechanism from above, engaging it
at the bottom first and then at the top.

Close the bottom door of the
appliance.

Mounting the top door of the
appliance:

Place the top door of the appliance
on the bearing pin

in the middle of

the appliance.

Close the top door of the appliance.

Put the hinge bracket

on the

opposite side and and fasten it with
the screws

The screw holes may have to be
pre-punched or use a power
screwdriver.

Now place the cover

on the

opposite side.

Align the appliance door with the
appliance housing via the elongated
holes in the bottom hinge bracket.
Tighten the screws.

Changing the door hinging

Summary of Contents for KFN 14943 SDE









































































Search results

Summary of Contents for KFN 14943 SDE

Reviews:

Related manuals for KFN 14943 SDE

Brands by name

Popular brands

Miele KFN 14943 SDE, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14943 SDE

Reviews:

Related manuals for KFN 14943 SDE

Brands by name

Popular brands