Miele KFN 14943 SDE Operating And Installation Instructions Download

Page: 59 / 72

Remove cover

Now the soft-close mechanism and the
appliance are no longer connected.

Remove panel

Push the shock absorber arm

far as possible towards the handle
side.

Loosen the screws

on the

soft-close mechanism and the
spacer.

In the middle, pry out the housing
with the soft-close mechanism using
a flathead screwdriver.

Then, pry the housing with the
soft-close mechanism out of the
retainer from the appliance side.

Put the soft-close mechanism aside.

Push the spacer out towards the
hinge side.

Put the spacer aside.

Removing the top door of the
appliance:

Loosen the cover

by carefully

sliding a flathead screwdriver from
below into the recess.

Remove the cover

together

with?the mounting bracket

Loosen the mounting bracket

from

the cover

by pushing it slightly to

the left and then removing the cover
plate towards the front.

Turn the mounting bracket

180°.

Place the cover

on the front of the

mounting bracket

and push it to

the right. The writing must be visible.

Unscrew the bearing

mechanism,

turn it 180° and replace it on the
opposite side. If necessary,
pre-punch the screw holes.

Remove the top cover

by pushing

it from back to front and lifting it up.

Remove cover

upwards.

Changing the door hinging

Summary of Contents for KFN 14943 SDE









































































Search results

Summary of Contents for KFN 14943 SDE

Reviews:

Related manuals for KFN 14943 SDE

Brands by name

Popular brands

Miele KFN 14943 SDE, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14943 SDE

Reviews:

Related manuals for KFN 14943 SDE

Brands by name

Popular brands