The "Freezer" symbol and the Alarm off
button will flash until the temperature in
the freezer section is cold enough.
The appliance will now start cooling,
and the interior light of the refrigerator
will come on when you open the door.
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer
section until the temperature is cold
enough (at least -18 °C).
Use this button to switch back and forth
between the refrigerator section and
the freezer section.
If you want to select the freezer section
(e. g. to check the temperature),
^
touch the sensor button to switch
from the refrigerator section to the
freezer section until the "Freezer"
symbol lights up yellow.
Depending on the selected
temperature zone, you can
– select the DynaCool function,
– select either Super cool or Super
freeze, or
– adjust the temperature.
Please refer to the relevant section in
the manual for more information.
Cool pack
Place the cool pack in the top freezer
drawer. The cool pack will be at its
most effective after it has been in the
freezer for approximately 24 hours.
Turning the appliance off
^
Touch the On/Off button until all the
indicators go out. (If this does not
happen, the safety lock is still
activated).
The refrigerator and freezer sections
turn off one after the other.
The interior lighting goes out and the
cooling is turned off.
To turn the refrigerator or freezer
section on and off separately
The refrigerator and freezer sections
can be turned on and off separately so
that you can use one section only if you
wish.
This is useful, for example when going
on holiday, when you only need to have
the freezer section running.
Turning the appliance On and Off
14
Summary of Contents for KFN 14943 SDE
Page 56: ...Appliance dimensions A B C KFN 14943 SDE ed 2020 750 630 Installation information 56 ...
Page 69: ...69 ...
Page 70: ...70 ...
Page 71: ...71 ...