Miele KFN 14842 SD cs-1 Operating And Installation Instructions Download

Page: 64 / 76

Push hinge pin

up and out from

underneath.

The soft-close mechanism is now no
longer fixed to the appliance.

Remove panel

Slide soft-close mechanism bracket

as far as it will go towards the

handle side of the door.

Undo screw

on the soft-close

mechanism and the spacer.

Using a flat-bladed screwdriver push
the centre of the soft-close
mechanism towards the middle of the
door.

Then prise the soft-close mechanism
out of the hinge side of the door.

Then place it to one side.

Push the spacer out towards the
hinge side.

Then place the spacer to one side.

Removing the lower door

Close the lower door.

Pull the middle hinge pin

upwards

to remove it.

Carefully lift the lower door off and
place it to one side.

Pull cover

off.

Unscrew hinge plate

, rotate it by

180° and fit it on the opposite side.

Turn plastic cover

180° and refit it

in the centre of hinge plate

Refit cover

on the opposite side.

Changing the door hinging

Summary of Contents for KFN 14842 SD cs-1













































































Search results

Summary of Contents for KFN 14842 SD cs-1

Reviews:

Related manuals for KFN 14842 SD cs-1

Brands by name

Popular brands

Miele KFN 14842 SD cs-1, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14842 SD cs-1

Reviews:

Related manuals for KFN 14842 SD cs-1

Brands by name

Popular brands