Miele KFN 14842 SD cs-1 Operating And Installation Instructions Download

Page: 26 / 76

Changing the temperature display
brightness

The temperature display brightness can
be adjusted to suit the lighting
conditions of the room.

Touch and leave your finger on the

sensor.

At the same time, briefly touch the
On/Off sensor (without letting go of
the

sensor).

Leave your finger on the

sensor for

another 5 seconds until

appears in

the display.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

The temperature display brightness
can now be changed by touching the

sensor:

d 0

: Maximum brightness

d 1

: Reduced brightness

–: Return to menu.

The old setting lights up, and your
newly selected setting flashes.

Touch the On/Off sensor to confirm
the new setting.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

You have now left settings mode.

The correct temperature

Summary of Contents for KFN 14842 SD cs-1













































































Search results

Summary of Contents for KFN 14842 SD cs-1

Reviews:

Related manuals for KFN 14842 SD cs-1

Brands by name

Popular brands

Miele KFN 14842 SD cs-1, Operating And Installation Instructions

Search results

Summary of Contents for KFN 14842 SD cs-1

Reviews:

Related manuals for KFN 14842 SD cs-1

Brands by name

Popular brands