Before building the appliance in you will
need to decide on the door hinging. If
left hand door hinging is required follow
these instructions.
^
Open the appliance doors and
slightly loosen screws
a
on the
appliance using a Pozidrive
screwdriver.
^
Push the doors outwards and take
them off their hinges.
^
Take covers
c
off, and remove
screws
d
.
^
Remove screws
a
and refit them
loosely on the opposite side in the
2nd and 4th fixing holes from the
outside.
With the middle 4 fixing screws
a
,
you should first transfer to top two
screws, and then the bottom two. Do
not transfer all 4 screws at once.
^
Fit screws
d
into the inner fixing
holes on the opposite side.
^
Remove door fixing screws
b
, and
refit the hinges in their diagonally
opposite corners.
^
Refit the appliance doors onto
pre-fitted screws
a
, then tighten the
screws.
^
Cover the holes which are now open
using covers
c
and stoppers
e
.
Changing the door hinging
36