^
Secure the appliance to the housing
unit at the top and bottom by
screwing four screws through the
hinge plates (Detail Y).
^
Tighten the screws through the fixing
piece (detail X), or through the
middle of the long slot in the plastic
bracket and flip the plastic bracket
downwards.
^
Fit the 3 screws through the fixing
profile strip
b
(detail Z).
^
Close the door.
Fitting the furniture door
^
A gap of 8 mm must be maintained
between the appliance door and the
fixing bracket.
^
Push fitting aids
a
up to the height of
the furniture door: the lower edge "X"
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted, see
-
on
the diagram.
^
Undo nuts
b
and take fixing bracket
c
off together with the fitting aids.
^
Using a pencil mark a line down the
centre of the inside of the furniture
door.
^
Hang the fixing bracket with the
fitting aids
a
onto the
inside side
of
the furniture door. Align the fixing
bracket centrally.
^
Attach the fixing bracket securely
using at least 6 short 4 x 14 mm chip
board screws
b
. (On cassette doors
only use 4 screws on the edges).
^
Pull the fitting aids upwards to
remove them
c
.
^
Turn them round and insert them right
into the middle slots on fixing bracket
d
.
Installing the appliance
39