Miele K 34673 iD Operating And Installation Instructions Download Page 77

Page: 77 / 92

Installing the appliance

Preparing the appliance



Position the appliance in front of the
housing unit.



Slide the cover strip



into the hold-

ers as shown.



Screw fixing bracket



into the pre-

drilled holes in the appliance door us-
ing hex screw





Secure a second pair of fixing brack-
ets



in the handle area of the door.

Use the pre-drilled holes in the appli-
ance door.



Push the appliance into the building-
in niche: When pushing the appliance
into its niche make sure that the
mains cable does not get trapped.

Tip:

To help you push it into position, tie

a piece of string around the plug to “in-
crease” the length of the connection
cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the ap-
pliance is in the unit.

Summary of Contents for K 34673 iD





























































































Search results

Summary of Contents for K 34673 iD

Reviews:

Related manuals for K 34673 iD

Brands by name

Popular brands

Miele K 34673 iD, Operating And Installation Instructions

Search results

Summary of Contents for K 34673 iD

Reviews:

Related manuals for K 34673 iD

Brands by name

Popular brands