Miele K 34673 iD Operating And Installation Instructions Download Page 28

Page: 28 / 92

Selecting further settings



By touching the





sensor, you

can now select whether the safety
lock is activated or deactivated:

: the safety lock is deactivated

: the safety lock is activated



Touch the OK sensor to confirm your
selection.

The selected setting is applied, the



symbol flashes.



Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits set-
tings mode automatically after ap-
proximately one minute.

The



symbol will appear in the display

when the lock is activated.

Audible tones



The appliance has audible tones such
as the sensor tone and the door alarm.

The sensor tone and door alarm tone
can be switched on or off.

There are four settings to choose from.
Option

is set the factory, i.e. the

sensor tone and the door alarm are
switched on.

Switching audible tones on/off



Touch the settings sensor.

All symbols available for selection will
appear in the display and the



sym-

bol flashes.



Touch the sensors for setting the
temperature (





) repeatedly until

the



symbol flashes.



Touch the OK sensor to confirm your
selection.

The last selected setting flashes and
the



symbol lights up in the display.

Summary of Contents for K 34673 iD





























































































Search results

Summary of Contents for K 34673 iD

Reviews:

Related manuals for K 34673 iD

Brands by name

Popular brands

Miele K 34673 iD, Operating And Installation Instructions

Search results

Summary of Contents for K 34673 iD

Reviews:

Related manuals for K 34673 iD

Brands by name

Popular brands