Miele K 34673 iD Operating And Installation Instructions Download Page 76

Page: 76 / 92

Installing the appliance

Parts required for installation

All installation parts are number coded.
This coding is also used in the installa-
tion instructions.

–

for installing the appliance in its
housing unit:

* These parts are only supplied with ap-
pliances with a niche height of 140 cm
or more.

** Qty depends on niche height; max.
qty applies to appliances requiring
niche height of 140 cm or more (also
contains additional installation parts for
fitting large or divided furniture doors).

–

for fitting the furniture door:

** Qty depends on niche height. Also
contains additional installation parts for
fitting large or divided furniture doors.

All fitting instructions given are for a

right hand hinged

appliance. If you

have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.

Summary of Contents for K 34673 iD





























































































Search results

Summary of Contents for K 34673 iD

Reviews:

Related manuals for K 34673 iD

Brands by name

Popular brands

Miele K 34673 iD, Operating And Installation Instructions

Search results

Summary of Contents for K 34673 iD

Reviews:

Related manuals for K 34673 iD

Brands by name

Popular brands