Miele K 34472 iD Operating And Installation Instructions Download Page 14

Page: 14 / 92

A damaged appliance can be dangerous. Check the appliance

for visible signs of damage. Do not use a damaged appliance.

For safety reasons, this appliance may only be used when it has

been built in.

The appliance must be disconnected from the mains electricity

supply during installation, maintenance and repair work. Ensure that
power is not supplied to the appliance until after it has been
installed or until after any maintenance or repair work has been
carried out.

Unauthorised installation, maintenance and repairs can cause

considerable danger to users. Installation, maintenance and repair
work must only be carried out by a Miele authorised technician.

While the appliance is under guarantee, repairs should only be

undertaken by a Miele authorised service technician. Otherwise the
guarantee is invalidated.

Miele can only guarantee the safety of the appliance when

original Miele replacement parts are used. Faulty components must
only be replaced by genuine Miele original spare parts.

Warning and Safety instructions

Summary of Contents for K 34472 iD





























































































Search results

Summary of Contents for K 34472 iD

Reviews:

Related manuals for K 34472 iD

Brands by name

Popular brands

Miele K 34472 iD, Operating And Installation Instructions

Search results

Summary of Contents for K 34472 iD

Reviews:

Related manuals for K 34472 iD

Brands by name

Popular brands