background image

Before using for the first time

^

Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.

Important:
To ensure the correct functioning of
the appliance, let it stand for
between ½ and 1 hour after
transporting it to its final location
before connecting it to the mains.

Switching on

^

Turn the temperature selector in a
clockwise direction away from "0".

The appliance starts cooling, and the
interior light will come on when the door
is opened.

Switching off

^

Turn the temperature selector in an
anti-clockwise direction from "1" back
to the "0" position.

The cooling system and the interior light
are now switched off.

Switching off for longer
periods of time

If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,

^

switch the appliance off,

^

switch off at the wall socket and
withdraw the plug,

^

clean the appliance out and

^

leave the door ajar to air the
appliance.

If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
mould and odours are likely to build
up inside the appliance.

Switching on and off

12

Summary of Contents for K 2202 S-1

































Reviews: