Miele K 2202 S-1, Operating And Installation Instructions

Page: 18 / 32

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Make sure that water cannot get into
the temperature selector or into the
light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Before cleaning
^
Switch the appliance off by turning
the temperature selector to "0",
switching off at the wall socket and
removing the plug.
^
Take any food out of the appliance
and store it in a cool place.
^
Take out any removable parts e.g.
shelves for cleaning.
Cleaning the outer casing, the
interior and accessories
^
Clean the appliance at least once a
month using warm water and a little
washing-up liquid.
^
Accessories and shelves should all
be hand-washed. The butter dish is,
however, dishwasher safe.
^
Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^
After cleaning, wipe the outer casing,
the interior and accessories with a
damp cloth and dry with a soft cloth.
Leave the door open to air the
appliance for a short while.
E-Cloth
^
A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals.
Ventilation gaps
^
The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Cleaning and care
18