^
Unscrew the screws
a
on the cover
b
and pull off the sticker
c
.
^
Remove the cover
b
.
^
Push the module into the slot until it
locks into place.
^
Connect the appliance to the power
supply and turn it on. After several
seconds the indicator light
e
will
come on.
The indicator light will display different
colors one after the other; any control
light at the end indicates that the
module was correctly installed.
If the indicator light does not come on,
installation of the module was
unsuccessful. In that case, repeat the
process. If that does not correct the
problem, contact Miele.
^
Pull the antenna
d
straight out.
^
Guide the cover
b
over the antenna
d
and screw on the cover.
^
Angle the antenna
d
so that it faces
to the right or left.
^
If necessary, disconnect the power
supply and continue installing the
appliance.
Preparing the installation
niche
,
Keep the appliance door closed
until it is securely fastened in the
niche. Tipping hazard.
Because of the size and weight of
the appliance, it is essential to
ensure that the appliance cannot tip
over once it has been mounted in
the niche.
Installing the appliance
50
Summary of Contents for K 1803 Vi
