Miele Imperial DWW 1250, Operating And Installation Manual

Page: 28 / 40

– Bend the top hanging retainers ap-
prox. 45° inwards. This makes fitting
easier.
Recirculation Extraction
– Pull the extension piece slightly out-
wards and push over the upper re-
taining plate.
For recirculation make sure that the
openings in the extension piece are po-
sitioned at the same height as the air
vents in the directional unit.
– Screw the extension piece firmly to
the upper retaining plate at each
side with two 3.9 x 7.5 mm screws.
– Cover the screw heads with the
cover caps supplied.
Only for recirculation:
– Fit the recirculation grilles into the ex-
tension piece and into the directional
unit behind so that the slats point
downwards.
Installation
28