Miele HS19, Operating Instructions Manual

Page: 81 / 260

en
8
1
Error messages

Risk of injury caused by rotating roller brush.
You can injure yourself on the rotating roller brush.
Switch the vacuum cleaner off before dealing with any problems. Use the On/
Off switch on the Comfort handle to do this.
Error messages are displayed with a quick flashing light on the battery charging
state indicator on the PowerUnit.
Problem Cause and remedy
Top indicator is flashing
quickly “Comfort handle not recognised” error
 Remove the Comfort handle and reconnect it (see
“Installation and connection – Connecting the
Comfort handle”).
 Remove the battery, wait for 10 seconds and rein-
sert it.
Bottom and top indicat-
ors are flashing quickly Internal system error
 Remove the battery, wait for 10 seconds, reinsert
it and charge it.
Bottom and middle in-
dicators are flashing
quickly “Battery overheating” or “Battery not recognised” er-
ror

Wait for approximately 30 minutes before switch-
ing the vacuum cleaner back on again.
 Insert an original Miele AP01 lithium-ion re-
chargeable battery (HX LA).