Miele HS18, Operating Instructions Manual, Page: 76 / 204

en
76
Problem Cause and remedy
The robot vacuum
cleaner does not return
to the base station after
vacuuming.
It had started vacuuming from somewhere in the
room.

The robot vacuum cleaner will return to its starting
point.
There is insufficient light for the robot vacuum
cleaner to navigate.

Provide sufficient lighting.
The base station is not connected correctly.

Connect the base station exactly as described in
these operating instructions, see section “Connec-
tion” – “Connecting the base station”.
The signal between the infrared transmitter on the
base station and the robot vacuum cleaner is broken.

Clean the front of the base station and the front of
the robot vacuum cleaner carefully with a soft, dry
cloth and make sure that no items disrupt the sig-
nal.
Obstacles on the floor which is to be vacuumed can
impede navigation.

Watch the robot vacuum cleaner during vacuum-
ing.

Remove any problematic obstacles.

Section off the problematic area with the magnetic
strip.

Reduce the robot vacuum cleaner’s maximum
crossing over height, see section “Use” – “Redu-
cing the maximum crossing over height”.
The robot vacuum
cleaner is not charging.
The base station is not connected correctly.

Connect the base station exactly as described in
these operating instructions, see section “Connec-
tion” – “Connecting the base station”.