Miele HS17, Operating Instructions Manual

Page: 52 / 208

en
52

Attach the new seal to the side and
clip it into position.
 Replace the dust box in the robot va‐
cuum cleaner, making sure it clicks
into position.
Cleaning the front wheel

Place the robot vacuum cleaner upsi‐
de down on a level, clean surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as it
can come loose.

Unclip the cover.
 Remove the front wheel.

Remove any threads and hairs and
clean the front wheel with the brush
end of the cleaning brush.

Replace the front wheel and close the
cover making sure it clicks into positi‐
on.
Cleaning the sensors

Carefully clean the sensors on the si‐
de and the bottom of the robot vacu‐
um cleaner using a dry cotton wool
bud.
Changing the batteries in the remote
control
The remote control requires two 1.5 V
(AAA) batteries.

Remove the battery compartment co‐
ver.
 Replace the batteries making sure
the polarity is correct.
Replacing the rechargeable battery
Keep a spare original Miele lithium-ion
rechargeable battery to hand for your
Scout RX1.
 Place the robot vacuum cleaner upsi‐
de down on a level, clean surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as it
can come loose.

Unscrew the cover of the recharge‐
able battery compartment on both si‐
des with a cross-headed screwdriver.